Skip to main content Scroll Top

EPC Changes In 2027: What Fabric Performance Means For Windows And Doors

The government has confirmed that reformed domestic Energy Performance Certificates (EPCs) will launch across England and Wales in the second half of 2027. The reformed EPC will introduce four headline measures:

  • Fabric Performance
  • Heating System
  • Smart Readiness
  • Energy Cost

For anyone replacing windows or doors, Fabric Performance is the most directly relevant of the four measures.

What does Fabric Performance measure?

Fabric Performance will measure the thermal performance of the physical shell of a home, which is how effectively it limits unwanted heat transfer and contributes to heating and cooling demand. That covers walls, floors, roofs, windows, doors and other external openings, including insulation and airtightness.

A home that loses less heat through its walls, roof, windows, doors and gaps generally needs less energy to stay warm in colder conditions.

Under the new system, the thermal performance of windows and external doors will contribute to the Fabric Performance measure. Heat can escape through old glazing, worn seals and gaps around frames. Well-specified, properly installed replacements can reduce those losses.

However, replacing one window or door will not automatically move a property from one EPC band to another. Fabric Performance will take the whole property into account.

How U-values and installation affect performance

A U-value measures how readily heat passes through a building element. Generally, the lower the figure, the better its resistance to heat transfer. For doors, look for the U-value of the complete doorset where possible because the frame, glazing, threshold and door leaf can all affect overall performance.

At AQ Windows, our Universal composite doors achieve U-values of 1.4 W/m²K or better, while some Palladio specifications achieve lower whole-doorset U-values. The Palladio range uses a 65mm reinforced fibreglass construction, with triple glazing as standard on glazed designs. These specifications do not guarantee a future EPC grade, but they do provide a useful way to compare the thermal performance of different doorsets.

Product specifications are only part of real-world performance, however. Even a highly insulated product can perform poorly if gaps around the frame allow uncontrolled air leakage. That makes accurate measurements and properly sealed frames just as important as the specification of the window or door itself.

Why a window or door rating is not your EPC rating

A product energy rating, like a BFRC rating, applies to an individual window or door product, whereas an EPC assesses the whole home. Fabric Performance also takes in the rest of the building fabric, including wall, roof and floor insulation, thermal bridging and airtightness, as well as the home’s size and layout.

An A-rated door does not make the property itself EPC A-rated. The EPC takes far more than one product into account.

Under the government’s current proposals, Fabric Performance, Heating System and Smart Readiness will use A-to-G bands, while Energy Cost will be shown as an estimated annual bill in pounds. With three separate A-to-G headline ratings on the new EPC, a product energy rating could still easily be confused with a rating for the property itself.

Do you need to wait until 2027 to replace windows or doors?

The EPC changes alone are not a reason to delay replacing windows or doors that already need attention. Draughty windows, damaged frames, worn door seals and poor insulation are problems now.

If you replace windows or doors before 2027, keep records of the products installed, including the glazing type and relevant U-values. Keep the paperwork with your property records so the product specifications are easy to retrieve later. These records may also be useful for future assessments, depending on the final evidence requirements for HEM:EPC assessments.

The government has confirmed the four headline measures and the 2027 timetable, but the final HEM:EPC methodology and band boundaries have not yet been published. So be wary of anyone promising that a particular window or door will guarantee a specific Fabric Performance grade in 2027.

Ready to compare your options? Talk to AQ Windows

AQ Windows supplies Universal and Palladio composite doors in Swansea, Cardiff, Neath, Bridgend, Merthyr Tydfil and elsewhere across South Wales.

If you’re comparing composite doors in Swansea, AQ Windows can help you compare the relevant doorset specifications for its Universal and Palladio ranges, as well as provide quotes and home surveys. Contact AQ Windows to discuss the options for your home.

Leave a comment